Carte UC Industrielle au format ATX


Carte UC industrielle microATX IEI - LGA1155 Intel® Core™ i7/i5/i3/Pentium®/Celeron - Intel® H61- …

LGA1155 Intel® Core™ i7/i5/i3/Pentium®/Celeron® processor supported
Up to 16 GB 1333 MHz dual-channel DDR3 SDRAM
Intel® HD Graphics technology integrates high-performance graphics and media processing
TPM V1.2 hardware security provided by the TPM module
IEI One Key Recovery solution allows you to create rapid OS backup and recovery

IMB-H610A : Caractéristiques

CPULGA1155 socket supports Intel® Core™ i7/i5/i3 quad/ dual, Pentium® dual and Celeron® dual/single core processors
System ChipsetIntel® H61
System MemoryTwo 240-pin 1333/1066 MHz dual-channel unbuffered DDR3 SDRAM DIMMs supported (system max. 16GB)
EthernetLAN1: Realtek RTL8111E PCIe GbE controller with ASF 2.0 support
LAN2: Realtek RTL8111E PCIe GbE controller
I/O Interface1 x PS/2 KB/MS
1 x RS-422/485
5 x RS-232
4 x SATA 3Gb/s without RAID & AHCI
10 x USB 2.0 (4 by rear IO, 6 by pin header)
Digital I/O8-bit programmable I/O
Super I/OFintek F81866
TPM1 x TPM connector (2x10 pin)
SMBus1 x 4-pin wafer
AudioRealtek ALC662 HD audio codec (Line-in, Line-out, Mic)
Display InterfacesDual display supported
1 x VGA (up to 2048 x 1536 @75Hz)
1 x DVI-D (up to 1920 x 1200 @60Hz)
Expansion1 x PCIe x16 slot
3 x PCIe x1 slot
Watchdog TimerSoftware programmable supports 1~255 sec. system reset
Power SupplyATX/AT power supply
Power Consumption[email protected], [email protected] , [email protected], [email protected], [email protected] (Intel® 2.60GHz CPU with two 1333MHz 4GB DDR3 memory)
GraphicIntel® HD Graphics 2000/3000 (based on CPU type)
Support for DX10.1 and OpenGL 3.0
Full MPEG2, VC1, AVC Decode
Operating Temperature-10°C ~ 60°C
Storage Temperature-20°C ~ 70°C
Humidity5% ~ 95%, non-condensing
Dimensions244mm x 244mm
WeightGW: 1200g / NW: 680g
Front Panel1 x Front panel connector (power LED, HDD LED, speaker, power button, reset button)
I2C1 x 4-pin wafer
Front Audio1 x 10-pin header
Fan Connector1 x 4-pin CPU fan connector
2 x 3-pin system fan connector